Print

Machine Nut & Long Series Taps

 

 

MACHINE NUT (BS949) These taps were designed for tapping nuts on machines, and have a long thread, shank and square length. The shank diameter is reduced below the thread minor diameter to enable the tap to run through the work piece. This was originally to allow nuts to collect on the shank. For nut production, taper leads were used to distribute the cutting action, but these taps are now generally used as long reach, and are supplied also in bottom and second leads.




Last Updated: Saturday, 21 October 2017 21:34

Shopping Cart

VirtueMart
Your Cart is currently empty.

Secure Shopping

Search Products

Featured Products

Jumbo Combination Spanner 80mm
Jumbo Combination Spanner 80mm
£66.00
£52.80
You Save: 20.00%


Drill Set HSS 1-13mm x 0.5mm
Drill Set HSS 1-13mm x 0.5mm
£16.64
£9.99
You Save: 40.00%


Jumbo Combination Spanner 75mm
Jumbo Combination Spanner 75mm
£57.60
£46.08
You Save: 20.00%


250mm Bison 4 Jaw D1-4 Independent Chuck
250mm Bison 4 Jaw D1-4 Independent Chuck
£780.00
£390.00
You Save: 50.00%


M32 Metric Slip Gauges Grade 1 Inspection
M32 Metric Slip Gauges Grade 1 Inspection
£200.64
£140.45
You Save: 30.00%